MFC-Gas-Alicat Archives - (주)엘피엠테크-LPMTECH https://lpmtech.co.kr/portfolio_category/mfc-gas-alicat/ 농축기, 세포배양기, 레귤레이터, 가스혼합기, MFC, 스태틱믹서, 유량계 등 실험장비 및 유체 계측/혼합장비 전문업체 Fri, 19 Jun 2020 09:03:50 +0000 ko-KR hourly 1 https://wordpress.org/?v=6.7.4 MCV Series https://lpmtech.co.kr/portfolio-items/mcv-series/ Mon, 20 Apr 2020 08:02:48 +0000 http://lpmtech.co.kr/?post_type=avada_portfolio&p=18199 Vacuum Gas Mass Flow Controller MCV Series » Range : lowest range 0-0.5 sccm / 0-500 sμlm                   up to highest range 0-20 slpm» Accuracy : ± (0.8% of Reading + 0.2% of Full Scale)» Typical Response Time : 100 ms (Adjustable)» Repeatability [...]

The post MCV Series appeared first on (주)엘피엠테크-LPMTECH.

]]>

Vacuum Gas Mass Flow Controller

MCV Series

» Range : lowest range 0-0.5 sccm / 0-500 sμlm 
                  up to highest range 0-20 slpm
» Accuracy : ± (0.8% of Reading + 0.2% of Full Scale)
» Typical Response Time : 100 ms (Adjustable)
» Repeatability : ± 0.2% Full Scale
» Operating temperature : -10°C to +60°C
» Max internal pressure (static) : 145 psig
» Warm-up Time : < 1 Second

제품리스트 　
카탈로그 다운로드 　
　견적요청 　

진공 가스 MFC

MCV 시리즈는 MCE와 하드 진공 어플리케이션을 위한 통합 공압 차단 밸브를 결합시킵니다.
영점 설정 조건에서 오염을 방지하기 위해 공기 라인을 차단 밸브에 연결하십시오.

동영상

 

Performance

Model

MCV

MCVS

Accuracy at calibration conditions after tare

± (0.8% of Reading + 0.2% of Full Scale)

High Accuracy at calibration conditions after tare

± (0.4% of Reading + 0.2% of Full Scale) High Accuracy option not available for units ranged under 5 sccm

Repeatability

± 0.2% Full Scale

Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

0.5% to 100% Full Scale / 200:1 Turndown

1% to 100% Full Scale / 100:1 Turndown

Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)

Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

Integrated Valve Leak Integrity

1 x 10-9 atm scc/sec Helium max

 

 

Operating Conditions

Model

MCV

MCVS

Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius

Humidity Range (Non–Condensing)

0 to 100%

Maximum Internal Pressure (Static)

145 psig

Proof Pressure

175 psig

Mounting Attitude Sensitivity

None

Valve Type

Normally Closed

Ingress Protection

IP40

Wetted Materials

MCV: 303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless Steel, Silicon, Glass, PCTFE.
MCVS: 316LSS, 303SS, 430FRSS, FFKM (Kalrez) standard, Viton, EPDM, Buna, Neoprene as needed for some gases.

Communications/Power

Model

MCV

MCVS

Monochrome LCD or Color TFT Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input / Output Signal1 Options

RS-232 Serial / RS-485 Serial / Modbus RTU / PROFIBUS / EtherNet/IP / DeviceNet / Modbus TCP/IP / EtherCAT

Analog Input / Output Signal2 Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Output Signal2

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8-Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6-pin locking / 8-pin M12

Supply Voltage

12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)

Supply Current

0.250 Amp

1. The Digital Output Signal communicates Mass Flow, Volumetric Flow, Pressure and Temperature
2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate your choice of Mass Flow, Volumetric Flow, Pressure or Temperature

* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.

The post MCV Series appeared first on (주)엘피엠테크-LPMTECH.

]]> MCQ Series https://lpmtech.co.kr/portfolio-items/mcq-series/ Mon, 20 Apr 2020 02:34:41 +0000 http://lpmtech.co.kr/?post_type=avada_portfolio&p=18190 High Pressure Gas MFC MCQ Series » Range : lowest range 0-10 sccm                   up to highest range 0-5000 slpm » Accuracy : ±2% Full Scale » Typical Response Time : 100 ms (Adjustable) » Repeatability : ± 0.2% [...]

The post MCQ Series appeared first on (주)엘피엠테크-LPMTECH.

]]>

High Pressure Gas MFC

MCQ Series

» Range : lowest range 0-10 sccm
                  up to highest range 0-5000 slpm
» Accuracy : ±2% Full Scale
» Typical Response Time : 100 ms (Adjustable)
» Repeatability : ± 0.2% Full Scale
» Operating temperature : -10°C to +60°C
» Max internal pressure (static) : 320 psig
» Warm-up Time : < 1 Second

제품리스트 　
카탈로그 다운로드 　
　견적요청 　

고압 어플리케이션을 위한 Mass Flow Controller

MCQ 시리즈 MFC는 더 높은 라인 압력(160-320 psia)이 필요한 애플리케이션에 빠른 제어 응답을 제공합니다.
이 컨트롤러는 압력이 급상승할 때에도 새로운 설정치를 빠르게 달성하고 유지합니다.

동영상

Performance

Available Ranges

10 sccm to 3000 slpm
Accuracy at calibration conditions after tare

±2% Full Scale

Repeatability

±0.2% Full Scale
Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

2% to 100% Full Scale / 50:1 Turndown
Maximum Flow Rate

up to 128% Full Scale (Gas Dependent)

Typical Response Time

100 ms (Adjustable)
Warm-up Time

< 1 Second

 

Operating Conditions

Operating Temperature

−10 to +60 ºCelsius

Maximum Internal Pressure

320 psig

Proof Pressure

400 psig

Mounting Attitude Sensitivity

None
Ingress Protection

IP40

Wetted Materials

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless Steel, Silicon, Glass.

Communications/Power

Monochrome LCD or Color TFT Display
with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and
Temperature
Digital Output Signal1 Options

RS-232 Serial / RS-485 Serial / Modbus RTU / PROFIBUS / EtherNet/IP / DeviceNet / Modbus TCP/IP / EtherCAT

Analog Output Signal2 Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Optional Secondary Analog Output Signal2

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8-Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6-pin locking / 8-pin M12
Supply Voltage

12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)

Supply Current

0.250 Amp

  1. The Digital Output Signal communicates Mass Flow, Volumetric Flow, Pressure and Temperature
  2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate your choice of Mass Flow, Volumetric Flow,
    Pressure or Temperature

* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.

The post MCQ Series appeared first on (주)엘피엠테크-LPMTECH.

]]> MCS Series https://lpmtech.co.kr/portfolio-items/mce-series-2/ Tue, 04 Feb 2020 06:03:13 +0000 http://lpmtech.co.kr/?post_type=avada_portfolio&p=16674 Mass Flow Controller for aggressive gases MCS Series » Range : lowest range 0-0.5 sccm/0-500 sμlm                   up to highest range 0-5000 slpm » Accuracy : ± (0.8% of Reading + 0.2% of Full Scale) » Typical Response Time [...]

The post MCS Series appeared first on (주)엘피엠테크-LPMTECH.

]]>

Mass Flow Controller for aggressive gases

MFM

MCS Series

» Range : lowest range 0-0.5 sccm/0-500 sμlm
                  up to highest range 0-5000 slpm

» Accuracy : ± (0.8% of Reading + 0.2% of Full Scale)
» Typical Response Time : 100 ms (Adjustable)
» Repeatability : ± 0.2% Full Scale
» Operating temperature : -10°C to +60°C
» Max internal pressure (static) : 145 psig
» Warm-up Time : < 1 Second

제품리스트 　
카탈로그 다운로드 　
　견적요청 　

압력 변동을 억제하는 즉각적인 가스 유량 제어

Alicat MCS Series 가스 MFC는 압력이 급 상승할 때에도, 새로운 셋포인트를 빠르게 달성하고 유지합니다.

특징

» 30ms 제어 응답
» 빠른 속도 및 안정성을 위한 접근 가능한 PID valve tuning
» full-range의 안정성을 위한 맞춤형 밸브 오리피스 사이즈

동영상


Performance

 

MCS & MCRS Mass Flow Controller
Accuracy at calibration conditions after tare

± (0.8% of Reading + 0.2% of Full Scale)

High Accuracy at calibration conditions after tare

± (0.4% of Reading + 0.2% of Full Scale)
High Accuracy option not available for units ranged under 5 sccm or over 500 slpm.

Repeatability

± 0.2% Full Scale
Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

1% to 100% Full Scale / 100:1 Turndown
Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)
Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

 

Operating Conditions

 

MCS & MCRS Mass Flow Controller
Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius
Humidity Range (Non–Condensing)

0 to 100%

Maximum Internal Pressure (Static)

145 psig
Proof Pressure

175 psig

Mounting Attitude Sensitivity

MCS: NoneMCRS: Mount with valve cylinder vertical & upright
Valve Type

Normally Closed

Ingress Protection

IP40
Wetted Materials

316LSS, 303SS, 430FRSS, FFKM (Kalrez) standard, Viton, EPDM, Buna, Neoprene as needed for some gases. If your application demands a different material, please contact Alicat.

Communications/Power

 

MCS & MCRS Mass Flow Controller
Monochrome LCD or Color TFT Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input / Output Signal1 Options

RS-232 Serial / RS-485 Serial / Modbus RTU / PROFIBUS / EtherNet/IP / DeviceNet / Modbus TCP/IP / EtherCAT

Analog Input / Output Signal2 Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Optional Secondary Output Signal2

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8-Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6-pin locking / 8-pin M12
Supply Voltage

MCS: 12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)

MCRS / MCRHS: 24 to 30 Vdc

Supply Current

MCS: 0.250 Amp

MCR: 0.750 Amp (MCRHS: 2.0 Amp)

1. The Digital Output Signal communicates Mass Flow, Volumetric Flow, Pressure and Temperature
2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate your choice of Mass Flow, Volumetric Flow, Pressure or Temperature

* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.

The post MCS Series appeared first on (주)엘피엠테크-LPMTECH.

]]> MCE Series https://lpmtech.co.kr/portfolio-items/mce-series/ Tue, 04 Feb 2020 04:46:59 +0000 http://lpmtech.co.kr/?post_type=avada_portfolio&p=16664 Mass Flow Controller for SEMI apps MCE Series » Range : lowest range 0-0.5 sccm/0-500 sμlm                   up to highest range 0-20 slpm » Accuracy : ± (0.8% of Reading + 0.2% of Full Scale) » Typical Response Time [...]

The post MCE Series appeared first on (주)엘피엠테크-LPMTECH.

]]>

Mass Flow Controller for SEMI apps

MCE Series

» Range : lowest range 0-0.5 sccm/0-500 sμlm
                  up to highest range 0-20 slpm

» Accuracy : ± (0.8% of Reading + 0.2% of Full Scale)
» Typical Response Time : 100 ms (Adjustable)
» Repeatability : ± 0.2% Full Scale
» Operating temperature : -10°C to +60°C
» Max internal pressure (static) : 145 psig
» Warm-up Time : < 1 Second

제품리스트 　
카탈로그 다운로드 　
　견적요청 　

진공 가스 MFC

노후화 된 MFC를 Alicat MCE Seires로 교체하세요! MCE Series는 진공 가스 Mass Flow Contorller로 빠른 제어 응답을 제공합니다.

특징

» 30ms 제어 응답 » 빠른 속도 및 안정성을 위한 접근 가능한 PID valve tuning » full-range의 안정성을 위한 맞춤형 밸브 오리피스 사이즈

동영상

Performance

 

MCEMCES
Accuracy at calibration conditions after tare

± (0.8% of Reading + 0.2% of Full Scale)

High Accuracy at calibration conditions after tare

± (0.4% of Reading + 0.2% of Full Scale) High Accuracy option not available for units ranged under 5 sccm or over 500 slpm.

Repeatability

± 0.2% Full Scale
Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

0.5% to 100% Full Scale / 200:1 Turndown1% to 100% Full Scale / 100:1 Turndown
Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)
Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

 

Operating Conditions

 

MCEMCES
Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius
Humidity Range (Non–Condensing)

0 to 100%

Maximum Internal Pressure (Static)

145 psig

Proof Pressure

175 psig

Mounting Attitude Sensitivity

None

Valve Type

Normally Closed
Ingress Protection

IP40

Wetted Materials

MCE: 303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless Steel, Silicon, Glass. MCES: 316LSS, 303SS, 430FRSS, FFKM (Kalrez) standard, Viton, EPDM, Buna, Neoprene as needed for some gases. If your application demands a different material, please contact Alicat.

Communications/Power

 

MCEMCES
Monochrome LCD or Color TFT Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input / Output Signal1 Options

RS-232 Serial / RS-485 Serial / Modbus RTU / PROFIBUS / EtherNet/IP / DeviceNet / Modbus TCP/IP / EtherCAT

Analog Input / Output Signal2 Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Analog Output Signal2

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Electrical Connection Options

8-Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6-pin locking / 8-pin M12

Supply Voltage

12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)
Supply Current

0.300 Amp

1. The Digital Output Signal communicates Mass Flow, Volumetric Flow, Pressure and Temperature 2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate your choice of Mass Flow, Volumetric Flow, Pressure or Temperature

* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.

The post MCE Series appeared first on (주)엘피엠테크-LPMTECH.

]]> MCW Series https://lpmtech.co.kr/portfolio-items/mcw-series/ Mon, 03 Feb 2020 07:11:12 +0000 http://lpmtech.co.kr/?post_type=avada_portfolio&p=16640 Mass Flow Controller with low pressure drop MCW Series » Range : lowest range 0-0.5 sccm/0-500 sμlm                  up to highest range 0-1000 slpm » Accuracy : ± (0.8% of Reading + 0.2% of Full Scale) » Typical Response Time [...]

The post MCW Series appeared first on (주)엘피엠테크-LPMTECH.

]]>

Mass Flow Controller with low pressure drop

MFC

MCW Series

» Range : lowest range 0-0.5 sccm/0-500 sμlm
                 up to highest range 0-1000 slpm

» Accuracy : ± (0.8% of Reading + 0.2% of Full Scale)
» Typical Response Time : 100 ms (Adjustable)
» Repeatability : 0.2% of the F.S. range
» Operating temperature : -10°C to +60°C
» Max internal pressure (static) : 45 psig (60 psia)
» Warm-up Time : < 1 Second

제품리스트 　
카탈로그 다운로드 　
　견적요청 　

압력 손실을 최소화한 가스 MFC

압력 손실이 낮은 “Whisper” 시리즈 Mass Flow Controller는 시스템 충격을 최소화하여 대기압 근처 또는 시스템 압력이 거의 없을 때 유량 측정이 가능합니다.

특징

» 30ms 제어 응답 » 빠른 속도 및 안정성을 위한 접근 가능한 PID valve tuning » full-range의 안정성을 위한 맞춤형 밸브 오리피스 사이즈

동영상

Performance

Accuracy at calibration conditions after tare

± (0.8% of Reading + 0.2% of Full Scale)
High Accuracy at calibration conditions after tare

± (0.4% of Reading + 0.2% of Full Scale)

High Accuracy option not available for units ranged under 5 sccm or over 500 slpm.

Repeatability

± 0.2% Full Scale
Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

0.5% to 100% Full Scale / 200:1 Turndown
Maximum Controllable Flow Rat

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)
Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

 

Operating Conditions

Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)
Operating Temperature

−10 to +60 ºCelsius

Humidity Range (Non–Condensing)

0 to 100%
Maximum Internal Pressure (Static)

45 psig Higher line pressures available, please contact Alicat.

Proof Pressure

175 psig
Mounting Attitude SensitivityMCW: None

MCRW: Mount with valve cylinder vertical & upright

Valve Type

Normally Closed

Ingress Protection

IP40

Wetted Materials

MCW: 303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced Polyphenylene

Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless Steel, Silicon, Glass.

MCRW: 303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced

Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, 416 Stainless Steel, Silicon, Glass.

If your application demands a different material, please contact Alicat.

Communications/Power

Monochrome LCD or Color TFT Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input / Output Signal1 Options

RS-232 Serial / RS-485 Serial / Modbus RTU / PROFIBUS / EtherNet/IP / DeviceNet / Modbus TCP/IP / EtherCAT
Analog Input / Output Signal2 Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Analog Output Signal2

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA
Electrical Connection Options

8-Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6-pin locking / 8-pin M12

Supply Voltage

MCW: 12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)MCRW: 24 to 30 Vdc
Supply CurrentMCW: 0.250 Amp

MCRW: 0.750 Amp (MCRWH: 2.0 Amp)

1. The Digital Output Signal communicates Mass Flow, Volumetric Flow, Pressure and Temperature. 2. The Analog Output Signal and Optional Secondary Analog Output Signal communicate your choice of Mass Flow, Volumetric Flow, Pressure or Temperature.

* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.

The post MCW Series appeared first on (주)엘피엠테크-LPMTECH.

]]>