Accuracy

±0.2% of full scale

Temperature Coefficient

±0.02% of reading per °F within +/- 50° F of customer specified conditions
±0.03% of reading per °F within +/- 50° F to 100° F of customer specified conditions
±0.04% of reading per °C within +/- 25° C of customer specified conditions
±0.06% of reading per °C within +/- 25° C to 50° C of customer specified conditions

Pressure Coefficient

One second to 63% of final velocity value

Gases

Most gases compatible with 316 L stainless steel

Gas Pressure (2 limitations)

Mechanical design pressure:
Compression fittings: 500 psig (34.5 barg)
150 lb flange or PN16 DN (-40° F to 100° F): 230 psig (15.9 barg)
150 lb flange or PN16 DN (250° F): 185 psig (12.8 barg)
150 lb flange or PN16 DN (450° F): 155 psig (10.7 barg)
NPT (-40° F to 250° F): 500 psig (34.5 barg)

Gas & Ambient Temperature

Gas …. -40°C ~ 177°C
Ambient …. -40°C ~ 50°C

Leak Integrity

5 X 10^-9 cc/sec of helium maximum

Power Requirements

18 to 30 VDC (regulated), 625 mA maximum
100 to 240 VAC, 50/60 Hz, 15 watts maximum
625 mA maximum operating current at 24 VDC and full scale flow
Maximum in rush current of 2 Amps at 24 VDC
Consult factory for other conditions

Output Signal

Linear 0–5 VDC or 0-10 VDC, 1000 ohms minimum load resistance or
Linear 4–20 mA proportional to mass flow rate,
700 ohms maximum resistance power supply dependent
User-selectable: Active non-galvanically separated or Passive
galvanically separated (loop power required)
See Digital Communications options below