Precision MFM for Gases
CORI-FLOW (국내방폭MFM)
» Range : lowest range 0.2…5kg/h
up to highest range 6…600kg/h
» Accuracy : 0.2% of rate
» Connections : 1/4″, 6mm OD compression type
» Operating pressure : max. 200 bar
» Output signal : Analog, RS232
» Warm-up time : > 30 min. for optimum accuracy
CORI-FLOW 시리즈 MFM은 높은 정확도를 제공하도록 설계되었습니다. CORI-FLOW는 특허받은 고급 코리올리형 직접 질량 유량 센서를 사용하여 압력, 온도, 밀도, 전도도 및 점도의 작동 조건이 변화하더라도 탁월한 성능을 달성합니다. 제어 밸브는 다음과 같은 질량 유량 범위를 측정하고 제어하기 위해 밀접하게 결합 될 수 있습니다.
컨트롤 밸브 설계는 진정한 모듈식 구조로 경쟁 설계와 차별화되며 사용자가 조정없이 현장에서 교체 할 수 있습니다.
표준 밸브는 정상적으로 닫히고 최대 Kv-값은 1.5입니다. 정상적으로 열린 밸브도 공급할 수 있습니다.
특징
» 국내 방폭 MFM
» 직접 질량 유량 측정
» 빠른 응답 시간
» 높은 정확도 (0.2% Rd for liquids, 0.5% Rd for gases)
» 소형 코리올리 컨트롤러
» 모든 습식 부품 스테인리스 스틸, 옵션 : Hastelloy-C22
» IP65 하우징
» ATEX 승인 Cat.3, Zone2 (옵션)
» 아날로그 플러스 디지털 통신
» 제어 밸브 또는 펌프를 위한 통합 PID 컨트롤러
» 배치 제어를 위한 통합 적산계
CORI-FLOW MFM 시리즈
PN 100bar |
PN 200bar |
M54 | 0.2 … 100 kg/h |
|
M55 | 0.5 … 600 kg/h |
적용분야
» 반도체 처리
» 식음료 산업
» (석유) 화학 설비
인증
» 국내 방폭 인증
Technical specifications
|
M54 | M55 |
Flow range (intermediate ranges available) |
min. 0,1…10 kg/h max. 1…100 kg/h |
min. 0,5…50 kg/h |
Mass flow accuracy |
Liquid: ±0.2% of rate; Gas: ±0.5% of rate |
Liquid: ±0.2% of rate; |
Turndown |
up to 1:100 | up to 1:100 |
Repeatability | ±0.1% of rate |
±0.1% of rate |
Zero Stability (ZS) |
< ±0.05 kg/h | < ±0.1 kg/h |
Operating temperature | – standard: 0…70°C; – max. 50°C for ATEX Cat.3, Zone 2; – max. 120°C (ambient+fluid) for special version with remote electronics (130°C ≤ 1 hour allowed for CIP) |
– standard: 0…70°C; |
Mounting |
Any position, attitude sensitivity negligible | Any position, attitude sensitivity negligible |
Leak integrity | Outboard < 2 x 10-9 mbar l/s He |
Outboard < 2 x 10-9 mbar l/s He |
Warm-up time |
> 30 min. for optimum accuracy |
> 30 min. for optimum accuracy |
Mechanical parts
|
M54 | M55 |
Material (wetted parts) | stainless steel 316L or comparable; optional: Hastelloy-C22 |
stainless steel 316L or comparable |
Pressure rating |
200 bar abs | 100 bar abs |
Process connections (welded) | compression type or face seal couplings |
compression type or face seal couplings |
Seals |
metal | metal |
Ingress protection (housing) | IP65 (weatherproof) |
IP65 (weatherproof) |
Electrical properties
|
M54 / M55 |
Power supply |
+15…24 Vdc +/- 10% |
Power consumption |
Meter: approx. 80 mA at 15 Vdc |
Analog output |
0…5 (10) Vdc, min. load impedance > 2 kΩ; |
Analog setpoint |
0…5 (10) Vdc, min. load impedance > 424 kΩ; |
Digital communication |
standard: RS232; |
Electrical connections
|
M54 / M55 |
Analog/RS232 |
8-pin DIN (male); |
PROFIBUS DP |
bus: 5-pin M12 (female); |
Devicenet™/FLOW-BUS/Modbus |
5-pin M12 (male); |
* 더 자세한 사양은 카달로그를 참고해주시기 바랍니다.